News

The difference and processing principle of optical glass biconvex lens-plano-convex lens-aspherical lens

2023-01-05 14:14


A biconvex lens focuses light into a single point with a positive focal length and consists of two convex surfaces of equal radius.

 

It is commonly used in imaging relay systems and for imaging objects at limited conjugate distances.

 

The characteristic is that the larger the conjugate ratio, the greater the phase difference produced.

 

 

Tinbright offers uncoated, anti-reflection coated biconvex lenses. AR options include UV, VIS, NIR, and SWIR.

 

 

Plano Convex (PCX) Lenses focuses parallel rays into a point that is the focal point of the lens. It is characterized by a positive focal length, where one side is flat and the other is convex.

 

 

When used, the convex surface is usually facing the incident light, because the light incident on both sides of the plano-convex lens is slightly different in the refractive index, so the focal length of the two sides is also different, in order to reduce spherical aberration, the beam should be incident by the curved surface as much as possible.

 

 

Plano-convex lenses are often used for aiming and focusing monochromatic light sources, converging directional light, or converting divergent point light sources into directional light

 

 

Aspheric lens (Aspheric Lenses) is different from spherical lens has a constant radius of curvature, the radius of curvature of aspheric lens is from the middle to the edge with the change of the main optical axis and continuous change, can better correct spherical aberration, chromatic aberration, and then improve the spot quality of the lens.

 

 

By adjusting the conical constant and aspheric coefficients, the lens is optimized to minimize aberrations, which are often used in barcode scanning, laser collimation, optical imaging and other fields. Aspheric lenses are designed with a single element to help minimize the number of lenses in the optical system.

 

 

Aspheric lenses allow optical designers to correct for aberrations with fewer optical elements than traditional spherical elements because the former provides them with more aberration correction than the latter can provide with multiple surfaces.