News

Optical lens raw material description

2023-01-05 14:26


The lens material adopts transparent medium, which is mainly divided into two categories: inorganic and organic. In our daily life, we also encounter a natural medium crystal lens, which is a lens made of quartz ore mill. In ancient times, there was a saying that crystal can nourish the eyes, but in fact, the main component of crystal is silica (SiO2), the biggest advantage is high hardness and not susceptible to moisture, but ultraviolet and infrared transmittance is higher, and the density of crystal is uneven, containing impurities, there are streaks and bubbles, etc. will form birefringence, thereby affecting vision.

1. Inorganic material - glass

Glass is a very special unshaped material, solid at room temperature, hard but brittle, viscous at high temperatures. Glass has no fixed chemical structure and therefore no exact melting point. As the temperature rises, the glass material will become soft, the viscosity will increase, and gradually change from solid to liquid, this gradually changing property is called "glass state". This property means that the glass can be machined and molded at high temperatures. Optical lenses made of glass materials have very good light transmission, more transparent after surface polishing, and are easier to process and form because of their high hardness, and higher precision.

(1) Ordinary glass materials (1.5 and 1.6): Crown glass with a refractive index of 1.523 is a manufacturing material for traditional optical lenses, of which 60%~70% is silica, and the rest is mixed with calcium oxide, sodium and boron.

(2) High refractive index glass materials: After years of research, lens manufacturers have found ways to increase the refractive index of materials while maintaining low dispersion, that is, adding new chemical elements to the glass. As early as 1975, titanium-containing lenses were produced, with a refractive index of 1.7 and an Abbe number of 41; 15 years later, lenses containing lanthanum were produced, with a refractive index of 1.8 and an Abbe number of 34; in 1995, a material with a refractive index of 1.9 appeared, adding the element niobium, and the Abbe number was 30, which is currently the highest refractive index lens material. It is widely used in laboratories and large enterprise R&D institutions for R&D and production in the field of optics.

(3) Dyed glass material: Mixing some metal salts with special absorption properties in glass materials will show the effect of coloring, such as: adding nickel and cobalt (purple), cobalt and copper (blue), chromium (green), iron, cadmium (yellow), gold, copper and selenium (red) and so on. These tinted lens materials are mainly used in the large-scale production of flat sunglasses or protective lenses. Some light-colored materials with special filtering properties (brown, grey, green or pink) are also used in the production of refractive correction lenses.

(4) Photochromic glass material: Photochromic phenomenon is a property that makes the material respond to the intensity of sunlight by changing the light absorption properties of the material. Its basic principle is to make ordinary glass (including plastic photochromic materials) darken under the influence of ultraviolet radiation, and the color under the influence of ambient high temperature, these two processes are reversible and may always exist. This phenomenon is accomplished by activating molecules of photochromic substances mixed in the material. In 1962, the first generation of photochromic glass materials appeared, and since then the performance has been continuously improved. Its main thing is to add silver halide crystals to the glass material. These crystals chemically react under ultraviolet radiation to darken the lens. The color change principle of the first generation of photochromic glass materials is an electron exchange between silver atoms and chlorine atoms, represented by silver chloride and the surrounding environment. In the absence of light, silver chloride is ionic, because silver ions are transparent, so the lens is also transparent; Under ultraviolet radiation, the unstable electrons leave the chloride ions, combine with the silver ions to form metallic silver and absorb light, and the lens becomes darker. When the ultraviolet radiation weakens, the moving electrons leave the silver atom and return to the chlorine atom, and the lens gradually returns to its original clarity. For general photochromic glass, the color change is also controlled by the temperature, and when the illuminance is unchanged, the lower the temperature, the darker the color. Most of the photochromic materials are gray and brown, commonly known as gray and tea, and other colors can also be achieved by special processes. All spectacle lenses, including fused bifocal lenses and progressive lenses, can be manufactured from photochromic materials. In recent years, photochromic plastic lenses have developed rapidly, materials are constantly improving, and their refractive index is no longer limited to 1.50.

2. Organic materials

Organic materials can be divided into two categories: thermosetting materials, which have the property of hardening after heating, and will not be deformed when heated, and most of the spectacle lenses are dominated by this material, such as CR-39. Thermoplastic materials with the properties of softening after heating, especially suitable for thermoplastics and injection molding, polycarbonate PC is this material.

(1) Thermosetting materials 1) Common resin materials: (CR-39) The scientific name carbon acid acrylacetic acid, or allyl glycol carbonates (Dially Glycol Carbonates), is the most widely used material for the production of ordinary plastic lenses. It was discovered by chemists at Columbia in the forties as the No. 39 material in a series of polymers developed by the U.S. Air Force, hence the name CR-39 (Columbia Resin No. 39). CR-39 was used in the production of ophthalmic corrective lenses in 1955~1960, and is the first generation of ultra-light, impact-resistant plastic lenses. As a thermosetting material, CR-39 is a liquid monomer that polymerizes and solidifies under the conditions of heating and addition of catalyst. Polymerization is a chemical reaction, i.e. a new polymer molecule consisting of several monomers of the same molecular structure, with different lengths and properties. As an optical lens, the parameters of CR-39 material properties are very suitable: the refractive index is 1.5 (close to ordinary glass lenses), the density is 1.32 (almost half of the glass), the Abbe number is 58~59 (only a small amount of color emission), impact resistance, high light transmittance, and can be dyed and coated. Its main disadvantage is that it is not as wear-resistant as glass, and it needs to be treated with anti-wear film. Plastic lenses can be processed by mode compression to the curvature of the lens surface, making them ideal for the production of aspherical lenses.

(2) Medium and high refractive index resin materials: Most of the medium and high refractive index materials are thermosetting resins, which develop very rapidly. Their refractive index can be increased using any of the following techniques: changing the structure of electrons in the original molecule, for example: introducing a benzene ring structure; Heavy atoms such as halogens (chlorine, bromine, etc.) or sulfur are added to the original molecule. Compared to conventional CR-39, lenses made of medium to high refractive index resin materials are lighter and thinner. They have a similar specific gravity to CR-39 (between 1.20 and 1.40), but have a greater dispersion (Abbe number 45), poor thermal resistance, but better UV resistance, and can also be dyed and coated with various systems. The manufacturing process for lenses using these materials is broadly consistent with the manufacturing principles of CR-39. Now 1.67 resin materials have been widely popular, and resin materials like 1.7 have also been sold in the market. Professionals in the optometry industry are constantly developing new materials and improving existing materials in order to achieve better performance of resin materials in the future.

(3) dyeing resin materials: a technology is now soaked in hot water dissolved in organic pigments, commonly used dyes are red, green, yellow, blue, gray, and brown, according to the needs can be arbitrarily dyed, the depth of the color can also be controlled, the whole lens can be dyed into one color, can also be dyed into a gradually changing color, such as the upper part of the lens dark, down gradually lightened, that is, commonly known as two-color or progressive color.

(4) Photochromic resin materials: The first generation of photochromic resin lenses appeared around 1986, but it was not until the first generation of Transi-tion lenses was launched in 1990 that it really began to become popular. The photochromic effect is obtained by adding a photosensitive mixture to the material, and under the action of ultraviolet radiation in a special band, the structure of these photosensitive substances changes, changing the absorption capacity of the material. There are two main ways to combine these mixtures: by mixing with liquid monomers before polymerization, or by penetrating into the material after polymerization (Transition lenses use the latter method). Photochromic plastic lenses use several photochromic substances, and these different color-changing effects are combined in the final manufacture, which makes the lens discoloration not only rapid, but also not completely controlled by temperature.

(5) A new type of photochromic plastic lens has been put on the market in 1993, thermoplastic materials (polycarbonate, polycarbonate, referred to as PC) thermoplastic materials such as PMMA were first used in the manufacture of lenses as early as the fifties, but due to the shortcomings of easy deformation and poor wear resistance when heated, they were soon replaced by CR-39. Today, however, the development of polycarbonate has brought thermoplastic materials back to lenses. In fact, polycarbonate is not a new material, it was discovered around 1995, but the real use in the field of optometry is only in recent years, it has been developed for several years and improved many times, especially in the CD industry, its optical quality has been comparable to other lens materials. Polycarbonate is a thermoplastic polymer with a linear amorphous structure that offers many optical advantages: excellent impact resistance (more than 39 times that of CR-10), high refractive index (ne=1.591, nd=1.586), very light (specific gravity = 1.20 g/cm³), 100% UV resistance (385 nm), high temperature resistance (softening point 140 °C/280 °F). Polycarbonate materials can also be systematically coated. It has a low Abbe number (Ve=31, Vd=30). In terms of dyeing, since the polycarbonate material itself is not easy to color, most of the color is absorbed through a dyeable wear-resistant film.