Optical lens processing
2023-01-05 14:23
First, optical cold processing
1. The optical lens is polished, the purpose is to erase some rough substances on the outer surface of the optical lens, so that the optical lens has a preliminary model.
2. After the initial polishing is completed, the optical lens is finely sanded, the R value is determined, and the impurities on the surface are removed.
3. After completing the two polishing, the optical lens is polished, and the polishing operation can make the appearance of the optical lens delicate and smooth.
4. After completing the polishing operation, the optical lens is cleaned, mainly to remove some impurities outside the optical lens after polishing and polishing.
5. After cleaning the powder outside the optical lens, start the edge grinding operation, and polish the optical lens according to the outer diameter of the required lens.
6. After the edging operation is completed, the coating is given to the optical lens, and there are many colors of the film, which can be coated according to the needs of the coating operation, and one film or several layers of film can be coated.
7. After completing the coating operation, the optical lens is inked, its function is to prevent the lens from reflecting, as long as the black ink is applied to the outer edge of the optical lens.
8. After the optical lens completes the ink coating work, the last step of the optical cold processing operation is to unite, use a special glue to glue the two optical lenses together, the R value of the two lenses needs to be opposite, while keeping the size and outer diameter equal.

Second, the polishing of glass lenses
Need to use polishing machine and polishing powder for use, in the polishing process, polishing time and polishing pressure and so on in the polishing process used in the use of parameter values must be determined, after the polishing operation to quickly clean the optical lens, otherwise some polishing powder will remain on the lens can not be removed.