News

Machining principle of aspherical precision numerical control method

2023-01-05 14:10


Similar to traditional spherical cold working, the precision CNC method also belongs to the material removal process (MRP) that uses milling, cutting and grinding and polishing to remove the surface material of the part. The difference is that precision numerical control is based on theoretical assumptions and the digitization and quantification of processing experience, and the computer-controlled processing tool does the ideal aspheric surface scanning motion relative to the workpiece, and the surface of the part is accurately removed through the "point" (or small area) contact in the process, thereby greatly improving the processing accuracy and repeatability.

Based on the principle of least material removal, we use the "best-fit sphere" formed by passing aspheric vertices and edge points as the spherical blank of aspheric surface. After removing the "excess" material, it can be "corrected" to an aspheric surface. Figure 1 shows the process of processing aspheric surfaces by MRP method, in which the red part is the removal part:

1

Figure 1 Schematic diagram of aspheric surface processing by MRP method

Obviously, the larger the diameter of the aspheric lens, the more material needs to be removed, and the longer the processing time; Similarly, in the abscissa direction, the larger the offset between aspheric and spherical (i.e. aspheric degree), the more "steep" the surface, and the higher the processing cost.